Shown: the 55X Cone Filler Kit.
Home Cone Filler Kits: Fill 55 Cones at Once, from $449
Fill a full batch of cones in one pass. Load your cones, pour and tamp, and the vibration table that comes in every Humboldt Filling Machines kit shakes your material into every cone at once. The 55X kits fill 55 cones per session, $449 to $549 depending on cone size, table included. Smaller batch? The 109mm King 19-cone kit is $369. Every cartridge is machine-cut and hand-finished in Humboldt County, California.
Lifetime warranty: if anything breaks, Humboldt Filling Machines replaces it, for the life of the unit. · 30-day returns: unused kits, cartridges and the C-ONE, with no restocking fee. · Made and shipped from Humboldt County, CA.
The 55X kit box has everything you need to start filling: a 55X cartridge in your cone size, riser, tamping tool, vibration table, stabilization mat and switched extension cord. The kit price covers the whole box, table included: $449 for 70mm, $469 for 84mm, $499 for 98mm Classic, $549 for 109mm King.
See it work before you buy
The Humboldt Filling Machines how-to video, "How To Use A Cone Filling Machine," and the C-ONE video show every step. Watch one and you'll see exactly what you're buying. Every kit also carries 30-day returns on unused kits.
How it works
- Load. Place the cartridge on the vibration table that comes in your kit, and fill the holes with empty cones.
- Fill and tamp. Pour your material over the cartridge and tamp firmly early in the fill for a tight pack.
- Lift and twist. Switch the table off, set the cartridge down on its riser so the cones push up, then remove each cone and twist the end to finish.
Pick your cone size
Your cartridge size is your cone length. Measure from the tip to the open end in millimeters, then match it here:
| Cone size | Typical fill | Starter kit (table included) | Add-on cartridge only |
|---|---|---|---|
| 109mm King | 1g | 19-cone kit $369 · 55-cone kit $549 | 19-cone cartridge $69 |
| 98mm Classic | 0.75g | 55-cone kit $499 | 19-cone cartridge $59 |
| 98mm Slim | 0.5g | 121-cone kit $619 | 121-cone cartridge $319 |
| 84mm Special 1¼ | 0.5g | 55-cone kit $469 | 19-cone cartridge $49 |
| 70mm Dogwalker | 0.25–0.35g | 55-cone kit $449 | 19-cone cartridge $39 |
Kit prices include the vibration table and stabilization mat, cartridge, riser, tamping tool and switched extension cord. Cartridge prices are for the cartridge alone, with its own riser and tamping tool.
Typical fill weights are from the Humboldt Filling Machines sizing guide and depend on your material. Not sure of your size? See the cartridge size guide.
Simple pricing
- 19-cone starter kit (109mm King): $369
- 55-cone starter kits: $449 (70mm), $469 (84mm), $499 (98mm Classic), $549 (109mm King)
- Add a size with a 7-cone cartridge: $29 (70mm, 84mm, 98mm Classic, 109mm)
- Add a size with a 19-cone cartridge: $39 (70mm), $49 (84mm), $59 (98mm Classic), $69 (109mm)
Comparing machines? See how our kits stack up against King Kone, RollCraft and Knockbox
Just starting? Try the C-ONE for $9.99
The C-ONE is the Humboldt Filling Machines single cone filler with a tamping tool. It comes in 70mm, 84mm, 98mm Classic, 98mm Slim and 109mm, and it costs $9.99. Use it to check your cone fit, or keep one on the bench for single fills.
Shipping
See the shipping policy for details.
FAQ
- Do I need a vibration table?
- Every Humboldt Filling Machines starter kit includes one, so you can start filling right out of the box, and it shakes your material into every cone at once. Each kit comes with a vibration table, cartridge, riser, tamping tool, stabilization mat and switched extension cord. The 55X kits start at $449 with the table included. Already own a table? Add any cartridge on its own, from $29.
- Which cones fit?
- Yes, if the length and width match. Match the cartridge to your cone length: 70mm, 84mm, 98mm Classic, 98mm Slim or 109mm King. Slim, slender, lean or Reefer 98mm cones need the 98mm Slim, and standard-width 98mm cones go in the 98mm Classic.
- What's in the 55X kit?
- A 55X cartridge in your cone size, riser, tamping tool, vibration table, stabilization mat and switched extension cord. The kit price covers all of it: $449 for 70mm, $469 for 84mm, $499 for 98mm Classic, $549 for 109mm King.
- What's in the 19-cone kit?
- The 19-cone kit includes the compact VB1 table (9 inch round) and SP1 mat: a 19X cartridge, riser, tamping tool, VB1 vibration table, SP1 stabilization mat and switched extension cord. The $369 price is for the whole kit, table included.
- Can I fill more than one cone size?
- Yes. Buy once and add sizes later: add a cartridge for each size you fill, from $29 for a 7-cone cartridge. Already own a table? Add any cartridge on its own, from $29.
- Is there a warranty?
- Every Humboldt Filling Machines product carries a lifetime warranty. If anything breaks, Humboldt Filling Machines replaces it, for the life of the unit.
- How do I clean a cartridge?
- Rinse it with hot water up to 130°F, or use an isopropyl alcohol and salt mixture for residue.
- Can a new team member run it?
- The steps are the same every time: load the cones, fill and tamp, then lift out each cone and twist the end. The how-it-works video walks through every step.
- How do I get a consistent fill?
- The vibration table shakes your material into every cone at once, and the tamping tool packs it. Tamp firmly early in the fill for a firm, tight pack, and leave a little space at the end of each cone to twist.
- What if it's not right for me?
- You have 30 days to return an unused kit, cartridge or C-ONE, with no restocking fee. See the refund policy.
Start filling at home
Lifetime warranty: if anything breaks, Humboldt Filling Machines replaces it, for the life of the unit. · 30-day returns: unused kits, cartridges and the C-ONE, with no restocking fee. · Made and shipped from Humboldt County, CA.
Just starting? Add a C-ONE, $9.99
Making pre-rolls for a brand?
Bigger cartridges cover your day in fewer runs, and the 300 Series fills 315 to 389 cones a session.